|
Home > Archive > Heating and air conditioning > October 2005 > Re: Cold Rheem (hot Bubba)
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Re: Cold Rheem (hot Bubba)
|
|
| Stormin Mormon 2005-10-26, 1:21 pm |
| "Bubba" <ReMoVe likealake@iname.com> wrote in message
news:5artl1hm0dqf75s6v8f0u9jthrhana19vv@4ax.com...
You leave the guy without heat all weekend.
CY: Actually, I did my best to fix the furnace on Friday after 6 PM when I
got the call. And it did run till the next day.
Monday you go back and toss a part at it.
CY: Monday I go back and have another look. Since cleaning the sensor
allowed it to run over night, I replaced the sensor rod.
That doesnt work so next you pick one of the most expensive parts to
replace The circuit board!
CY: Actually, you're mistaken again. After the customer called, I went over
and did some checking with my VOM. The next part I replaced was the rusty
screw holding down the sensor rod. I then called three other techs, and
asked for advice. After checking several other things with a VOM, and a few
more calls, the board appears to be the only thing left that could be wrong.
YOU FUCKING WORTHLESS STUPID GOD DAMN CROOK!
CY: Actually, you are a painfully ignorant jackass who jumps to conclusions.
You don't even bother to ask the relevant details, you just scream. Have you
considered psychiatric treatment?
I hope some backwoods hillbilly customer of yours takes your fat
stupid colored blind XXX out in the woods and puts some lead behind
your ear.
CY: I suspect with your anger problem, you're more likely than myself to get
shot at. at least I'm polite with folks.
Bubba
| |
| Carolina Breeze HVAC 2005-10-26, 1:21 pm |
|
"Stormin Mormon" <cayoung61-#spamblock*-@hotmail.com> wrote in message
news:_5N7f.96643$K91.79123@twister.nyroc.rr.com...
> "Bubba" <ReMoVe likealake@iname.com> wrote in message
> news:5artl1hm0dqf75s6v8f0u9jthrhana19vv@4ax.com...
>
> You leave the guy without heat all weekend.
> CY: Actually, I did my best to fix the furnace on Friday after 6 PM when I
> got the call. And it did run till the next day.
Obviously not.
>
> Monday you go back and toss a part at it.
> CY: Monday I go back and have another look. Since cleaning the sensor
> allowed it to run over night, I replaced the sensor rod.
You didnt say that....dumbass.
>
>
> That doesnt work so next you pick one of the most expensive parts to
> replace The circuit board!
> CY: Actually, you're mistaken again. After the customer called, I went
> over
> and did some checking with my VOM. The next part I replaced was the rusty
> screw holding down the sensor rod. I then called three other techs, and
> asked for advice. After checking several other things with a VOM, and a
> few
> more calls, the board appears to be the only thing left that could be
> wrong.
Polarity....valve...actually, until you know how to check things, dont come
in here acting all high and mighty when you pay the price for the advice you
asked for, with your history.
>
>
> YOU FUCKING WORTHLESS STUPID GOD DAMN CROOK!
> CY: Actually, you are a painfully ignorant jackass who jumps to
> conclusions.
> You don't even bother to ask the relevant details, you just scream. Have
> you
> considered psychiatric treatment?
You tend to leave out little details.
>
> I hope some backwoods hillbilly customer of yours takes your fat
> stupid colored blind XXX out in the woods and puts some lead behind
> your ear.
> CY: I suspect with your anger problem, you're more likely than myself to
> get
> shot at. at least I'm polite with folks.
Doubt it. Polite is sometimes telling the person that the unit is damaged in
a way you are not sure of....not fucking them with sweet words and slamming
parts to a unit.
You can turn a $50 repair into a $400 repair....polite fucking of the
customer eh?
No Chris...Bubba is on the right track...you however, will for sure get the
shit beat out of you one day, in one manner or another. Lord knows it
happens in here every time you post.
>
> Bubba
>
>
| |
| B-Hate-Me 2005-10-26, 4:21 pm |
|
"Stormin Mormon" <cayoung61-#spamblock*-@hotmail.com> wrote in message
news:_5N7f.96643$K91.79123@twister.nyroc.rr.com...
> I hope some backwoods hillbilly customer of yours takes your fat
> stupid colored blind XXX out in the woods and puts some lead behind
> your ear.
> CY: I suspect with your anger problem, you're more likely than myself to
> get
> shot at. at least I'm polite with folks.
So. You very politely say, "I'm sorry mamm, but you and your
4 young children are going to have to spend the weekend in a
cold house because I'm not quite bright enough to fix your heat".
That about sum it up?
| |
| ..p.jm@see_my_sig_for_address.com 2005-10-26, 5:21 pm |
| On Wed, 26 Oct 2005 15:16:38 -0400, "B-Hate-Me" <BHateMe@home> wrote:
>
>"Stormin Mormon" <cayoung61-#spamblock*-@hotmail.com> wrote in message
>news:_5N7f.96643$K91.79123@twister.nyroc.rr.com...
>
>So. You very politely say, "I'm sorry mamm, but you and your
>4 young children are going to have to spend the weekend in a
>cold house because I'm not quite bright enough to fix your heat".
>
>That about sum it up?
>
No, it doesn't come close.
"Sorry, lady, but I'm an XXXXXXX and I never so much as SAW
one of these before, but there are a couple of parts in there I think
I know where to buy, so I'm going to change them out. Too bad your 4
kids and you are going to die of CO poisoning because I'm dangerous
anywhere within 10 feet of a piece of HVAC equipment. Luckily, your
remaining family won't get a dime, because I have no insurance and my
Pinto ain't worth shit-fucking-all. But I promise to always be real
polite about it all.'.
And that shit ain't funny, either.
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/
Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/
| |
| Bubba 2005-10-26, 10:21 pm |
| On Wed, 26 Oct 2005 15:17:14 GMT, "Stormin Mormon"
<cayoung61-#spamblock*-@hotmail.com> wrote:
>"Bubba" <ReMoVe likealake@iname.com> wrote in message
>news:5artl1hm0dqf75s6v8f0u9jthrhana19vv@4ax.com...
>
>You leave the guy without heat all weekend.
>CY: Actually, I did my best to fix the furnace on Friday after 6 PM when I
>got the call. And it did run till the next day.
>
>Monday you go back and toss a part at it.
>CY: Monday I go back and have another look. Since cleaning the sensor
>allowed it to run over night, I replaced the sensor rod.
>
>
>That doesnt work so next you pick one of the most expensive parts to
>replace The circuit board!
>CY: Actually, you're mistaken again. After the customer called, I went over
>and did some checking with my VOM. The next part I replaced was the rusty
>screw holding down the sensor rod. I then called three other techs, and
>asked for advice. After checking several other things with a VOM, and a few
>more calls, the board appears to be the only thing left that could be wrong.
>
>
>YOU FUCKING WORTHLESS STUPID GOD DAMN CROOK!
>CY: Actually, you are a painfully ignorant jackass who jumps to conclusions.
>You don't even bother to ask the relevant details, you just scream. Have you
>considered psychiatric treatment?
>
>I hope some backwoods hillbilly customer of yours takes your fat
>stupid colored blind XXX out in the woods and puts some lead behind
>your ear.
>CY: I suspect with your anger problem, you're more likely than myself to get
>shot at. at least I'm polite with folks.
>
>Bubba
>
Chris,
I suggest you read this crap you just posted and then re-read your
original post. The two dont match!
The only thing that remains the same in these two posts is:
>YOU FUCKING WORTHLESS STUPID GOD DAMN CROOK!<
While you're at it. Tell us all exactly what you found with that $2.99
VOM meter and what it told you that made you determine that you needed
to replace the board.
Face it dipshit. You are an idiot when it comes to touching,
diagnosing, and "repairing" hvac equipment.
You learn it with training schools, having a mentor in close guideance
and years of experience. You dont have any of them. You seem bent on
trying to learn it as you go with no brains and no skills. God help
your customers. You are going to cost them a bundle
Bubba
| |
| Stormin Mormon 2005-10-27, 12:21 am |
| Chris,
I suggest you read this crap you just posted and then re-read your
original post. The two dont match!
CY: Actually, they are consistent. Maybe I didn't post every nose scratch in
the process. And you definitely didnt ask.
The only thing that remains the same in these two posts is:
>YOU FUCKING WORTHLESS STUPID GOD DAMN CROOK!
CY: And, what remains consistent is that you write information without
bothering to ask what happened.
While you're at it. Tell us all exactly what you found with that $2.99
VOM meter and what it told you that made you determine that you needed
to replace the board.
CY: Ah, you writing more incorrect information. Again.
Face it dipshit. You are an idiot when it comes to touching,
diagnosing, and "repairing" hvac equipment.
CY: You are writing more incorrect....
You learn it with training schools, having a mentor in close guideance
and years of experience. You dont have any of them.
CY: Incorrect.
You seem bent on
trying to learn it as you go with no brains and no skills.
CY: Again incorrect. Why don't you quit while you're behind? I don't think
you've written one correct thing in this thread.
God help
your customers. You are going to cost them a bundle
Bubba
CY: At least you're consistent. You are incorrect, and insulting. Quite a
combination.
| |
|
| On Thu, 27 Oct 2005 03:15:53 GMT, "Stormin Mormon"
<cayoung61-#spamblock*-@hotmail.com> wrote:
>Chris,
>I suggest you read this crap you just posted and then re-read your
>original post. The two dont match!
>CY: Actually, they are consistent. Maybe I didn't post every nose scratch in
>the process. And you definitely didnt ask.
>
>
>The only thing that remains the same in these two posts is:
>
>CY: And, what remains consistent is that you write information without
>bothering to ask what happened.
>
>While you're at it. Tell us all exactly what you found with that $2.99
>VOM meter and what it told you that made you determine that you needed
>to replace the board.
>CY: Ah, you writing more incorrect information. Again.
Just as I thought. Not a clue how to use a VOM meter nor how to
diagnose a circuit board.
C'mon Mormy. Explain this one. Im all ears.
Bubba
>
>Face it dipshit. You are an idiot when it comes to touching,
>diagnosing, and "repairing" hvac equipment.
>CY: You are writing more incorrect....
>
>
>You learn it with training schools, having a mentor in close guideance
>and years of experience. You dont have any of them.
>CY: Incorrect.
>
>You seem bent on
>trying to learn it as you go with no brains and no skills.
>CY: Again incorrect. Why don't you quit while you're behind? I don't think
>you've written one correct thing in this thread.
>
>God help
>your customers. You are going to cost them a bundle
>Bubba
>CY: At least you're consistent. You are incorrect, and insulting. Quite a
>combination.
>
>
| |
| Carolina Breeze HVAC 2005-10-28, 4:21 am |
|
"Bubba" <ReMoVe likealake@iname.com> wrote in message
news:98e1m11kb8egidm3qq9j506eqrts432hqj@4ax.com...
> On Thu, 27 Oct 2005 03:15:53 GMT, "Stormin Mormon"
> <cayoung61-#spamblock*-@hotmail.com> wrote:
>
>
> Just as I thought. Not a clue how to use a VOM meter nor how to
> diagnose a circuit board.
> C'mon Mormy. Explain this one. Im all ears.
> Bubba
He cant man...hes still trying to Google VOM.
>
>
|
|
|
|
|