|
Home > Archive > Tools repair and advice > June 2005 > 4 cycle engine
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
| Floating Mind 2005-06-17, 11:33 pm |
| 18 hp Briggs & Stratton, 2 cylinder. I've got gas in the crankcase oil,
and also oil coming out of the driver's side exhaust port.
I pulled the cover that exposes the valve springs and both valves seem
to be moving correctly, but I haven't pulled the head to see if the
valves are closing completely yet.
Any ideas?
| |
|
| Sounds like a bad fuel pump follow the fuel line if there is a cover
somewhere on the block it will have a diapram if it leaks gas will get in
the oil. Another possibility if the fuel tank is located above the engine
there will not be a fuel pump but if the float or needle valve in the carb
is leaking gas will get in the oil also. Hope this helps Russ
Floating Mind <Boat-Rocker@webtv.net> wrote in message
news:13982-41EBE4E0-264@storefull-3116.bay.webtv.net...
quote:
> 18 hp Briggs & Stratton, 2 cylinder. I've got gas in the crankcase oil,
> and also oil coming out of the driver's side exhaust port.
>
> I pulled the cover that exposes the valve springs and both valves seem
> to be moving correctly, but I haven't pulled the head to see if the
> valves are closing completely yet.
>
> Any ideas?
>
|
|
|
|
|