Tools repair and advice - Husqvarna 1983 24R Brushcutter gears

You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author

Husqvarna 1983 24R Brushcutter gears

aus4x4

2006-10-17, 3:26 am

Hi folks, my trusty old 1983 brushcutter has decided to strip the drive
gear in the gearhead.

Husqvarna no longer seem to carry this part, (501 78 44-01), but looking
at exploded part diagrams seems to indicate that the one for the 1991
125R, (502 14 74-01), is very similar.

Does anyone here happen to have some dimensions for the 125R part,
(diameters, length, teeth)?

The 24R part has 13 teeth, 17mm head diam, 10mm shaft diam, 5.5mm square
drive hole and 26mm overall length.

I realise I'd have to probably replace the ballraces, (had to anyway),
unfortunately the repair shops here in Australia want you to order the
part in.

TIA,
Dave

--
Posted via a free Usenet account from http://www.teranews.com

LinkBot