Tools repair and advice - Tree Branch Pruner

You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author

Tree Branch Pruner

Dave_s

2006-06-13, 3:21 pm

I have an old Tree branch pruner on a fiberglass pole. The blade is not
cutting completely thru the bark. This causes the cut branch to stay
attached to the limb by the piece of bark that was not completely cut.

All tool sharpening shops I have called will only sharpen the blade.
They tell me to disassemble the blade, bring in for sharpening, then
reasemble the blade myself. I can disassemble but I am CERTAIN I cannot
reassemble. The spring is too strong for me to stretch.

Can anyone suggest a company/store, near me, that will sharpen
including disassemble and reassemble. I live in Van Nuys, CA 91402 which
is near Los Angeles, CA.

New tool costs about $33 but tossing this perfectly usable tool is out
of the question. Thanks, Dave_S

LinkBot