| Author |
Need belt for Emerson attic/whole house fan(Dayton motor)
|
|
| berkeleydb 2005-11-07, 10:21 am |
| Need belt for Emerson attic/whole house fan...
I am looking for the fan or motor belt for the Dayton motor
that runs my Emerson Electric (whole house) fan.
I'm hoping someone can tell me where to look for the belt online...
Here is some information about the motor:
BELT MARKINGS:: 1230 5000 00
Dayton Split Phase A.C. motor
Model 6K 20A
HP 1/2
R.P.M. 1725/1140
Mtr Ref: 5A63 CXEKM-5114
Here is some information about the whole house fan.
I'm guessing that it may be as old as the house (up to 35 years old).
Emerson Electric
Cat. 224-D-2
V 115 A 9.7/6.6
Frame: 567
Brgs: SLEEVE
Code A
Ins class (either 8 or B, couldn't read it) PH 1.
| |
| Edwin Pawlowski 2005-11-07, 11:21 am |
|
"berkeleydb" <lee.burke.ctr@dla.mil> wrote in message
> I'm hoping someone can tell me where to look for the belt online...
>
> Here is some information about the motor:
>
> BELT MARKINGS:: 1230 5000 00
Belts are common and can be found at any industrial supply house. There
are probably some other numbers starting with 3L or 4L or similar. The
number above I did not see listed.
On McMaster's web page look for V belts under Power Transmission and you
will see how to measure.
www.grainger.com
www.mcmaster.com
>
| |
| Dr. Hardcrab 2005-11-07, 3:21 pm |
| Take the belt to any NAPA dealer. They will more than likely have it...
"berkeleydb" <lee.burke.ctr@dla.mil> wrote in message
news:1131370665.124405.143550@f14g2000cwb.googlegroups.com...
> Need belt for Emerson attic/whole house fan...
>
> I am looking for the fan or motor belt for the Dayton motor
> that runs my Emerson Electric (whole house) fan.
>
> I'm hoping someone can tell me where to look for the belt online...
>
> Here is some information about the motor:
>
> BELT MARKINGS:: 1230 5000 00
>
> Dayton Split Phase A.C. motor
> Model 6K 20A
> HP 1/2
> R.P.M. 1725/1140
> Mtr Ref: 5A63 CXEKM-5114
>
>
> Here is some information about the whole house fan.
> I'm guessing that it may be as old as the house (up to 35 years old).
>
> Emerson Electric
> Cat. 224-D-2
> V 115 A 9.7/6.6
> Frame: 567
> Brgs: SLEEVE
> Code A
> Ins class (either 8 or B, couldn't read it) PH 1.
>
| |
| berkeleydb 2005-11-08, 4:21 pm |
| Thanks for both suggestions above. McMaster wasn't able to help me,
and Grainger hasn't yet responded. I'll try the NAPA dealer
suggestion.
| |
| Jay Yeates 2005-11-10, 9:21 pm |
| "berkeleydb" <lee.burke.ctr@dla.mil> wrote in message
news:1131480732.703488.221950@o13g2000cwo.googlegroups.com...
> Thanks for both suggestions above. McMaster wasn't able to help me,
> and Grainger hasn't yet responded. I'll try the NAPA dealer
> suggestion.
....
go down to your local woodworking store (or online in many places) and buy
one of the adjustable belts they make for table saws ... don't have to worry
about sizing, runs a lot more quietly, and easily shortened or lengthened ..
plus they last well. more expensive, but well worth it (have it on my whole
house fan, and all my belt driven woodworking tools .. and keep a longer one
in my truck toolbox as a emergency replacement should i ever loose the
serpentine on the road)
| |
| gfretwell@aol.com 2005-11-11, 2:21 am |
| On 7 Nov 2005 05:37:45 -0800, "berkeleydb" <lee.burke.ctr@dla.mil>
wrote:
The other place to try is a lawn equipment place. Mowers use those
short belts. My fan uses a 4L240
4L is the width 1/2" (four eighths)
240 is the length 24.0"
|
|
|
|