|
Home > Archive > Home Repair forum > June 2005 > motion sensor light stuck on dusk-to-dawn mode
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
motion sensor light stuck on dusk-to-dawn mode
|
|
| E Gregory 2005-06-28, 11:25 pm |
| Hello,
I have an older motion sensor light which refuses to be reset to
regular motion sensing mode. After a power outage it switched to
dusk-to-dawn mode and won't budge. I've tried using the wall switch to
reset it to regular mode, doesn't work. I've tried changing the
positions of the little switch on the light itself, still doesn't work.
Could something have gotten fried when the power went out to cause
this behaviour? Any tricks that I could try to make it work properly??
Thanks,
Eileen
| |
| Rob Mills 2005-06-28, 11:25 pm |
|
"E Gregory" <uepmeg@email.unc.edu> wrote in message
news:42c1b9b2$1_1@news1.isis.unc.edu...
[vbcol=seagreen]
A power outage destroyed one of mine, luckily ($50 lights) it was one of
Home Depot's that had a life time warranty and I still had the receipt.
It's the rapid on and off during outages that gets them, I had two on the
same circuit and it just got the one. RM~
|
|
|
|
|