|
Home > Archive > Home Repair forum > April 2006 > Finishing off a basement - framing walls question
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Finishing off a basement - framing walls question
|
|
| 46erjoe 2006-04-04, 1:21 pm |
| Typically one must set back an outside wall about a half inch, then
insulate between the studs, right? But in my house, there is a lot of
plumbing that runs along the outside walls. Is it OK to frame a wall
much further, like about 6" to clear the pipes? How about even more,
like 2', so that the plumbing can be reached if there is leakage? My
basement is huge, so I'm not concerned about losing floor space. What
is the insulation recommendation then? Thanks.
| |
| The Reverend Natural Light 2006-04-04, 2:21 pm |
| Some here will tell you to leave a couple inches.
The book I read said to get the studs as close to the block/concrete as
you can but still have them plumb and straight. Then insulate with R13
non-faced batts and staple a continuous vapor barrier on the room side
of wall.
If you have plumbing along the wall, I'd guess the choice on an
additional few inches of clearance or building soffits is entirely
yours.
The 2' access space seems handy but sure is a high price to pay to
avoid having to re-do some drywall in 20 years, no matter how big the
basement is.
-rev
| |
| Patrick Coghlan 2006-04-04, 2:21 pm |
| 46erjoe wrote:
>Typically one must set back an outside wall about a half inch, then
>insulate between the studs, right? But in my house, there is a lot of
>plumbing that runs along the outside walls. Is it OK to frame a wall
>much further, like about 6" to clear the pipes? How about even more,
>like 2', so that the plumbing can be reached if there is leakage? My
>basement is huge, so I'm not concerned about losing floor space. What
>is the insulation recommendation then? Thanks.
>
>
What kind of plumbing is running along the outside walls? Is it 4" ABS
running along the ceiling? You can just build a bulkhead around it
rather than extend the entire wall out.
| |
| 46erjoe 2006-04-04, 11:21 pm |
| On Tue, 04 Apr 2006 13:01:56 -0400, Patrick Coghlan <info@coghlan.ca>
wrotF:
>46erjoe wrote:
>
>What kind of plumbing is running along the outside walls? Is it 4" ABS
>running along the ceiling? You can just build a bulkhead around it
>rather than extend the entire wall out.
Yeah is 4". I could box it in but it would be a PITA. Would prefer
the simpler way of just moving the stick walls inward. But if there
would be a moisture problem in the future then I guess I'll have to do
it.
|
|
|
|
|