|
Home > Archive > Home Repair forum > July 2006 > Washing machine basket rust - possible to fix, or buy new basket?
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Washing machine basket rust - possible to fix, or buy new basket?
|
|
| bryanska 2006-07-30, 1:25 pm |
| Hi, I have a 4-year old Kenmore Elite washer:
Serial: CK 4702946
Model# 110 20932993
The basket has spot rusts on it, around a few of the little holes. It's
starting to make rust marks on our clothes.
Is it possible to epoxy over the rust spots? Or will I have to buy a
new basket?
I currently have an Email to Sears to see if it's under warranty.
| |
|
| On 30 Jul 2006 10:12:05 -0700, "bryanska" <BARRELBACK@HOTMAIL.COM>
wrote:
>Hi, I have a 4-year old Kenmore Elite washer:
>
>Serial: CK 4702946
>
>Model# 110 20932993
>
>The basket has spot rusts on it, around a few of the little holes. It's
>starting to make rust marks on our clothes.
>
>Is it possible to epoxy over the rust spots? Or will I have to buy a
>new basket?
>
>I currently have an Email to Sears to see if it's under warranty.
My kenmore washer is rusty too.
I use an expensive spray can of white epoxy enamel paint on it after
sanding and wirebrushing the rust spots down to bare metal. Several
coats per instructions on the can.
It lasts about 3 years and then I do it again.
| |
| Orenthal 2006-07-30, 1:25 pm |
| On 30 Jul 2006 10:12:05 -0700, "bryanska" <BARRELBACK@HOTMAIL.COM>
wrote:
>The basket has spot rusts on it, around a few of the little holes. It's
>starting to make rust marks on our clothes.
>Is it possible to epoxy over the rust spots? Or will I have to buy a
>new basket?
You'll be better off sanding off the rust and applying appliance paint
on the bare spots.
Also, you might want to start removing your wet clothes from the
washer more quickly. Those rust marks don't transfer to clothes very
quickly. You must be leaving the clothes in the washer for quite some
time.
OJ
| |
| bryanska 2006-07-30, 5:25 pm |
| > My kenmore washer is rusty too.
> I use an expensive spray can of white epoxy enamel paint on it after
> sanding and wirebrushing the rust spots down to bare metal. Several
> coats per instructions on the can.
>
> It lasts about 3 years and then I do it again.
Thanks, if it comes down to paying for a new basket, I'll try this
first.
Any recommendations on brands, etc of paint?
Also, how can you tell it's wearing out?
| |
| bryanska 2006-07-30, 5:25 pm |
| > Also, you might want to start removing your wet clothes from the
> washer more quickly. Those rust marks don't transfer to clothes very
> quickly. You must be leaving the clothes in the washer for quite some
> time.
That's correct. We first noticed it then. Now we're removing them right
away, until we can get this fixed.
It's a very nice washer otherwise. All sorts of options. I can't afford
one as nice, if I had to buy new.
| |
| Phisherman 2006-07-30, 5:25 pm |
| On 30 Jul 2006 10:12:05 -0700, "bryanska" <BARRELBACK@HOTMAIL.COM>
wrote:
>Hi, I have a 4-year old Kenmore Elite washer:
>
>Serial: CK 4702946
>
>Model# 110 20932993
>
>The basket has spot rusts on it, around a few of the little holes. It's
>starting to make rust marks on our clothes.
>
>Is it possible to epoxy over the rust spots? Or will I have to buy a
>new basket?
>
>I currently have an Email to Sears to see if it's under warranty.
There's a product called Extend used for automobiles. It reacts with
the rust, seals the metal, and turns black. Follow the directions
carefully. It is best to leave the lid in the open position after
every wash to dry out the basket.
| |
| bryanska 2006-07-30, 8:25 pm |
| Sears has the basket for $89, local pickup at any Sears store.
The basket porcelain has a lifetime warranty, and they will repair. The
visit, with labor, is between $110 and $140.
I found this site: http://fixitnow.com/sbrvrs/washers.htm
It details how the Kenmore direct-drive cabinets are opened. I am going
to pull the basket myself - this is an easy fix, now that I know how to
open the thing up.
I will post with any future discoveries or problems. Thanks for the
help everyone!
| |
|
|
You will be spending almost half the value of a new unit. Baskets
are often well frozen onto a splined shaft and can be impossible
to remove. I think I would assure myself that I could get the
original basket to move before making the decision. You can
perform this experiment without taking the case apart.
______________________________
Keep the whole world singing . . . .
DanG (remove the sevens)
dgriff237@7cox.net
"bryanska" <BARRELBACK@HOTMAIL.COM> wrote in message
news:1154300713.447779.19400@m79g2000cwm.googlegroups.com...
> Sears has the basket for $89, local pickup at any Sears store.
>
> The basket porcelain has a lifetime warranty, and they will
> repair. The
> visit, with labor, is between $110 and $140.
>
> I found this site: http://fixitnow.com/sbrvrs/washers.htm
>
> It details how the Kenmore direct-drive cabinets are opened. I
> am going
> to pull the basket myself - this is an easy fix, now that I know
> how to
> open the thing up.
>
> I will post with any future discoveries or problems. Thanks for
> the
> help everyone!
>
| |
| 46erjoe 2006-07-31, 3:25 am |
| On 30 Jul 2006 10:12:05 -0700, "bryanska" <BARRELBACK@HOTMAIL.COM>
wrotF:
>Hi, I have a 4-year old Kenmore Elite washer:
>
>Serial: CK 4702946
>
>Model# 110 20932993
>
>The basket has spot rusts on it, around a few of the little holes. It's
>starting to make rust marks on our clothes.
>
>Is it possible to epoxy over the rust spots? Or will I have to buy a
>new basket?
>
>I currently have an Email to Sears to see if it's under warranty.
POR-15 www.por15.com
It's made for car restoration but will solve ANY rusty metal problem.
You don't even have to remove all the rust..
But it's pretty expensive and once the can is opened, it cannot be
closed and re-used.
Comes in only one color - black
| |
| Shane Hecker 2006-07-31, 3:25 am |
| I don't know if this will solve your problem, but here goes. There is a
product made by ironout inc. that is supposed to clean out soap scum and
mineral deposits from the washer. It's called washer magic. It's somewhat
expensive, but may be worth looking into. If it is like most products of
this type, they recommend to use it every few months.
"46erjoe" <somebody@spamless.net> wrote in message
news:21rqc2tl6chhd34b3pb1hvmohr3t8uusk3@4ax.com...
> On 30 Jul 2006 10:12:05 -0700, "bryanska" <BARRELBACK@HOTMAIL.COM>
> wrotF:
>
>
>
> POR-15 www.por15.com
> It's made for car restoration but will solve ANY rusty metal problem.
> You don't even have to remove all the rust..
> But it's pretty expensive and once the can is opened, it cannot be
> closed and re-used.
> Comes in only one color - black
| |
|
| On 30 Jul 2006 11:46:48 -0700, "bryanska" <BARRELBACK@HOTMAIL.COM>
wrote:
>
>Thanks, if it comes down to paying for a new basket, I'll try this
>first.
>
>Any recommendations on brands, etc of paint?
>
>Also, how can you tell it's wearing out?
I depend on the store guy to tell me the best brand. But avoid the
bargain brand 99cent stuff.
Rust will start to appear at either your paint job or in new places.
Bleach products will make stainless steel rust, so you bank on it that
it's gonna happen again. Plan for it. That means plan on replacing
your washer.
I agree with removing clothes as soon as the buzzer goes off, which
will guarantee no rust stains
Also leave the lid up and let it dry out between wash days and also
wipe it down with an old towel before adding clothes to wash.
..
| |
|
|
I agree.
The washer will have something else fail 22 days after spending $140
on a basket - assuming you can get it off without breaking something
else.
On Sun, 30 Jul 2006 18:38:54 -0500, "DanG" <dgriff237@7cox.net> wrote:
>
>You will be spending almost half the value of a new unit. Baskets
>are often well frozen onto a splined shaft and can be impossible
>to remove. I think I would assure myself that I could get the
>original basket to move before making the decision. You can
>perform this experiment without taking the case apart.
>______________________________
>Keep the whole world singing . . . .
>DanG (remove the sevens)
>dgriff237@7cox.net
>
>
>
>"bryanska" <BARRELBACK@HOTMAIL.COM> wrote in message
>news:1154300713.447779.19400@m79g2000cwm.googlegroups.com...
>
| |
| bryanska 2006-07-31, 8:25 pm |
| DanG wrote:
> You will be spending almost half the value of a new unit. Baskets
> are often well frozen onto a splined shaft and can be impossible
> to remove. I think I would assure myself that I could get the
> original basket to move before making the decision. You can
> perform this experiment without taking the case apart.
Worth a shot. A new Kenmore with comparable features is $479 on
clearance from $599.
| |
| nospamtodd@yahoo.com 2006-07-31, 8:25 pm |
| Technicians use a small bottle of appliance paint to cover rust. They
cost around 5 bucks or so. Get one at any parts counter. You might
also check the warranty on the basket. If you are still covered for
it, you would just pay labor to get it replaced. These baskets rarely
seize to the drive block.
|
|
|
|
|