|
Home > Archive > Home Repair forum > June 2007 > Source for PVD Brass wood screws, 3-inch ???
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Source for PVD Brass wood screws, 3-inch ???
|
|
| markharris2000@comcast.net 2007-05-18, 8:25 pm |
| I am trying to mount a glass shower door and the hinges that come with
it are supplied with screws that are too short for the thick stone
finish I have to work with. The hinges are CR Laurence brand in their
'Ultra' finish. Does anyone know of a supplier for PVD "Plasma Vapor
Deposition" Brass finished, flat head, philips drive screws? Three-
inches long needed.
Note: PVD is marketed as 'Forever Bright", "Ultra Brass" or similiar
marketing names. They all mean a much harder shiny brass looking
finish that resists corrosion much better than brass alone.
Thanks,
| |
| charlie 2007-05-18, 8:25 pm |
|
<markharris2000@comcast.net> wrote in message
news:1179524790.308950.108050@e65g2000hsc.googlegroups.com...
>I am trying to mount a glass shower door and the hinges that come with
> it are supplied with screws that are too short for the thick stone
> finish I have to work with. The hinges are CR Laurence brand in their
> 'Ultra' finish. Does anyone know of a supplier for PVD "Plasma Vapor
> Deposition" Brass finished, flat head, philips drive screws? Three-
> inches long needed.
>
> Note: PVD is marketed as 'Forever Bright", "Ultra Brass" or similiar
> marketing names. They all mean a much harder shiny brass looking
> finish that resists corrosion much better than brass alone.
>
> Thanks,
did you ask crl? they have a web site, although you have to have a
commercial account to actually purchase from them. they may take pity on you
if you contact them directly, or through the place that got you the doors.
regards,
charlie
http://glassartists.org/chaniarts
| |
| markharris2000@comcast.net 2007-06-01, 5:25 pm |
| I called CRL and they DO NOT carry them. Very odd. So I need to find
a PVD shop to custom plate some 3-inch screws.
Anyone know of a PVD plating shop?
On May 18, 3:43 pm, "charlie" <charlie.spit...@nospam.stratus.com>
wrote:
> <markharris2...@comcast.net> wrote in message
>
> news:1179524790.308950.108050@e65g2000hsc.googlegroups.com...
>
>
>
>
> did you ask crl? they have a web site, although you have to have a
> commercial account to actually purchase from them. they may take pity on you
> if you contact them directly, or through the place that got you the doors.
>
> regards,
> charliehttp://glassartists.org/chaniarts
|
|
|
|
|