Home > Archive > Home Repair forum > June 2007 > Re: Will a 1kw genny start my fridge *update*









You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

 

Author Re: Will a 1kw genny start my fridge *update*
ransley

2007-06-13, 5:25 pm

On Jun 13, 12:00 pm, Mark <makol...@yahoo.com> wrote:
>
>
>
> Does this generator use a DC generator with an inverter?
>
> I think that in the case of a generator with an inverter, the surge
> rating is limted by the electronics in the inverter.
>
> With the old fashioned mecahnical AC generators, the surge rating is
> much higher and is limited by the resistance of the windings...
>
> Mark- Hide quoted text -
>
> - Show quoted text -


pushing a unit is the way to break it, sure it will work but for how
long.

Toller

2007-06-13, 8:25 pm


"ransley" <Mark_Ransley@Yahoo.com> wrote in message
news:1181764343.150528.33890@g37g2000prf.googlegroups.com...
> On Jun 13, 12:00 pm, Mark <makol...@yahoo.com> wrote:
>
> pushing a unit is the way to break it, sure it will work but for how
> long.
>

Well, Yamaha says it will produce 3500w for 3 seconds. In the manual they
say it will simply shut off in event of an overload, and they don't warn
about overload breaking it. So, it seems likely that 2000w for 2 seconds,
without the genny shutting down, won't damage it


Smarty

2007-06-14, 3:25 am

Most likely neither the windings nor the inverter electronics will actually
be the limiting factor. All generators use some form of circuit breakers
and/or fuses to limit both the continuous current delivered as well as the
transient surge demand which is imposed by big inductive loads like motors,
etc. The breaker / fuse is deliberately chosen to protect the inverter /
windings / etc.

Unless somebody is deliberately trying to circumvent this design by either
putting a jumper across the breaker/fuse or repeatedly overloading the
circuit and flipping the breaker on manually, the generator should know how
to protect itself against the common start-up demands which typical
appliances demand.

It is entirely possible though that the generator is designed and fused to
only deliver a very small amount of extra transient surge current above its'
normal steady state continuous rating. In this case, the 'fridge' could blow
the breaker every time it cycles on its' compressor, if the generator is
undersized.

Smarty
"Toller" <Toller@Yahoo.com> wrote in message
news:ly_bi.10322$ya1.1235@news02.roc.ny...
>
> "ransley" <Mark_Ransley@Yahoo.com> wrote in message
> news:1181764343.150528.33890@g37g2000prf.googlegroups.com...
> Well, Yamaha says it will produce 3500w for 3 seconds. In the manual they
> say it will simply shut off in event of an overload, and they don't warn
> about overload breaking it. So, it seems likely that 2000w for 2 seconds,
> without the genny shutting down, won't damage it
>



LinkBot





Other archives available: Cellular phones topics archive | Web Design forum archive | Software help archive | Hardware reviews archive | Programming topics archive

Copyright 2004 - 2009 homeownerschat.com