|
Home > Archive > Home Repair forum > June 2007 > wire gauge
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| hi
I will be building a shed and want to run 100 amp 240v service into it
from my house (house main is 200 amp).
what gauge wire do I need? it will be about 145 feet ( 60 feet
underground in conduit)
thanks
| |
| Doug Miller 2007-06-29, 9:25 am |
| In article <1183120936.917674.319310@g4g2000hsf.googlegroups.com>, greif <garyreif@email.com> wrote:
>hi
>
>I will be building a shed and want to run 100 amp 240v service into it
>from my house (house main is 200 amp).
>
>what gauge wire do I need? it will be about 145 feet ( 60 feet
>underground in conduit)
#3 copper or #1 aluminum, minimum, and make sure you run four wires (2 hots,
neutral, and ground) -- but why 100A in a shed??
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
| |
| Edwin Pawlowski 2007-06-29, 9:25 am |
|
"Doug Miller" <spambait@milmac.com> wrote in message news:cb8hi.9337
>
> #3 copper or #1 aluminum, minimum, and make sure you run four wires (2
> hots,
> neutral, and ground) -- but why 100A in a shed??
>
> --
Price out that #3 copper and you may find that a 30A or 60A service will
suite your needs. I have 30A 240V in my garage/shop and it handles al my
lighting and power tool needs.
| |
|
| in the past I've done too many thing where I didn't prepare for the
future, so do i need 100 amp now, no but maybe someday
| |
| Doug Miller 2007-06-29, 1:25 pm |
| In article <1183131495.479821.39000@g4g2000hsf.googlegroups.com>, greif <garyreif@email.com> wrote:
>in the past I've done too many thing where I didn't prepare for the
>future, so do i need 100 amp now, no but maybe someday
>
Even 60A should be plenty to run stuff like arc welders and air compressors.
But it's your shed, and your money.
I'm just sayin'...
--
Regards,
Doug Miller (alphageek at milmac dot com)
It's time to throw all their damned tea in the harbor again.
| |
|
| DA had written this in response to
http://www.thestuccocompany.com/mai...uge-229652-.htm :
greif wrote:
> hi
> I will be building a shed and want to run 100 amp 240v service into it
> from my house (house main is 200 amp).
> what gauge wire do I need? it will be about 145 feet ( 60 feet
> underground in conduit)
> thanks
There are a few gauge vs. current vs. voltage drop online calculators
online, such as this one:
http://www.powerstream.com/Wire_Size.htm
##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
News and Discussions Community of the Net
Web and RSS access to your favorite newsgroup -
alt.home.repair - 220368 messages and counting!
##-----------------------------------------------##
| |
| ** Frank ** 2007-06-29, 5:25 pm |
|
"Doug Miller" <spambait@milmac.com> wrote in message
news:s5bhi.27432$YL5.14068@newssvr29.news.prodigy.net...
> In article <1183131495.479821.39000@g4g2000hsf.googlegroups.com>, greif
> <garyreif@email.com> wrote:
> Even 60A should be plenty to run stuff like arc welders and air
> compressors.
> But it's your shed, and your money.
>
> I'm just sayin'...
>
> --
> Regards,
> Doug Miller (alphageek at milmac dot com)
>
> It's time to throw all their damned tea in the harbor again.
What we did in the past is to provide provisions for a future 100A service
like underground conduit and sub panel sized for 100A but pull 30A cables
for now. If the OP needs 100A for the shed, he has to upgrade the house main
panel anyway. I have lots of power tools like drill presses, table saws,
planer, compressors, welder etc. but I only use one tool at a time so 30A at
240V is more than enough until I install an AC unit.
| |
| Steve Barker 2007-06-30, 3:25 am |
| We ran a detached garage 250' from the house for 40 years on a buried 10/3.
Welder, lights, air compressor, grinders, heat, never a flicker, never a
tripped 30a in the house.
--
Steve Barker
"greif" <garyreif@email.com> wrote in message
news:1183131495.479821.39000@g4g2000hsf.googlegroups.com...
> in the past I've done too many thing where I didn't prepare for the
> future, so do i need 100 amp now, no but maybe someday
>
| |
|
|
|
|
|