Home Repair forum - Ball Park Estimate

Author

Ball Park Estimate

Schmooseme

2008-04-01, 5:25 pm

Could anybody give me a ball park on the cost of a Payne PF4M Fan
Coil? the unit cost and installation cost. My ripoff home warrenty
co. wants to give me only 600.00 for both. I can't even get anyone to
look at the Payne unit. I call HAVC companies and they tell me, are
not interested in working on a Payne. Can you belive it!

RSC

Edwin Pawlowski

2008-04-01, 9:26 pm

"Schmooseme" <rsceliberti@hotmail.com> wrote in message
news:cc165541-ae26-4816-a605-7231b857664d@d45g2000hsc.googlegroups.com...
>
> Could anybody give me a ball park on the cost of a Payne PF4M Fan
> Coil? the unit cost and installation cost. My ripoff home warrenty
> co. wants to give me only 600.00 for both. I can't even get anyone to
> look at the Payne unit. I call HAVC companies and they tell me, are
> not interested in working on a Payne. Can you belive it!
>
> RSC

If no one wants to work on the unit, the cost is immaterial. Two lessons
here. It is time to replace the Payne and it is time to drop the home
warranty. They are a rip off. Put the premium money in the bank instead.
I'd guess the $600 is on the low side though.

letterman@invalid.com

2008-04-02, 3:25 am

On Tue, 1 Apr 2008 12:47:27 -0700 (PDT), Schmooseme
<rsceliberti@hotmail.com> wrote:

>Could anybody give me a ball park on the cost of a Payne PF4M Fan

If you want a ball park fan, you'd be best off contacting a ball park.

Of course it's pretty easy to build your own ball park. Here is how
you do it. Begin by pulling down your pants. Then grab your balls,
and park them in your wife's (or girlfriends) pussie. Your wife or
other woman will become your best fan. There is no cost associated
with this if you're married or have a girlfriend who lets you use her
pussie for free. However, if you have to pay a prostitute, the cost
could be rather high.

Schmooseme

2008-04-03, 1:26 pm

Yes....

I did drop the HW company. I did find out that the Payne comapny will
sell the unit directly to me for about 850.

They do not require you to be a contractor or HVAC dealer. I would
just need someone to install it. Some Joe I guess. That just tells
you what kind of unit the Payne is.............. If I knew how to use
a vaccum I'd do it myself. I have to remove the R22 and put in the
new R144 (I think it's called)..... I better let someone from Joes
Garage do it. :-)

I've bee fighting this for a year now, check this out for a laugh:
http://www.schmooseme.net/payne-in-the-ear.htm

RSC

LinkBot