Home > Archive > Alternative Power sources > July 2006 > Re: Rear venting Bosch 125 tankless water heater (vent height









You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

 

Author Re: Rear venting Bosch 125 tankless water heater (vent height
m Ransley

2006-07-13, 9:25 am

You should get the reason from Bosch. I put in my Bosch 125 with a power
vent for that reason and a tight house. I am zone 5 to - 20f, a shorter
run could have froze the 125, at -10f I have checked the temp at the
coil and it was 40f. Lower it down if you can, or possibly give a slight
angle, but if your house is tight construction as mine is a power vent
is needed anyway, I did not draft. What heat Zone are you, at zone 8-9
you might be safe with a smaller length

LinkBot





Other archives available: Cellular phones topics archive | Web Design forum archive | Software help archive | Hardware reviews archive | Programming topics archive

Copyright 2004 - 2008 homeownerschat.com