|
Home > Archive > Home Automation > November 2006 > Random ALL ON Codes
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Random ALL ON Codes
|
|
| The Taz 2006-11-08, 8:25 pm |
| Ok, i got a real good one for everyone out there..
I have been using the X10 system for several years, and has grown in my home
over the years, and now just about includes all my lights and applinaces..
I use Homeseer, for timing and controlling, as well as one or two touch
screen controllers.
Every so often, lately more then not.
At random times, everything on my 'F' Code goes ON!
Lilghts, A/C, Fans, Etc..
If its on the F code, it turns on...
It is driving me nuts..
i have a AT004 Tester,
but am not even sure where to begin.
Anyone ever see this?! or have any idea or any help would be so very much
appericaited.
Thanks
Fred
| |
|
| Guess you have checked but do you see anything in the Homeseer log before
this happens?
One solution would be not to use F code,.could someone near be using F code
and sending All lights on? This would not turn on the Apliances though?
Ron
"The Taz" <TazsNews@tazsworld.com> wrote in message
news:lPv4h.6798$3r6.2102@trndny09...
> Ok, i got a real good one for everyone out there..
> I have been using the X10 system for several years, and has grown in my
> home over the years, and now just about includes all my lights and
> applinaces..
> I use Homeseer, for timing and controlling, as well as one or two touch
> screen controllers.
> Every so often, lately more then not.
> At random times, everything on my 'F' Code goes ON!
> Lilghts, A/C, Fans, Etc..
> If its on the F code, it turns on...
> It is driving me nuts..
> i have a AT004 Tester,
> but am not even sure where to begin.
> Anyone ever see this?! or have any idea or any help would be so very much
> appericaited.
>
> Thanks
> Fred
>
|
|
|
|
|