|
Home > Archive > Home Automation > August 2006 > X10 and C-bus
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
|
|
|
| Hi all,
I have a question that I hope someone can answer here in Australia we dont
get the same x10 switches that are availale in the US, I like the Clipsal
C-Bus switches and these switches appear to be momentary action switches
anyways.
I was wondering if it is possible to use these switches with an X10 setup
and as I slowly update my light switchs then I can move to c-bus as a phased
migration?
Is this possible ?
Thanks
Imran
| |
|
| You could ask on the charmedquark.com forum (it's a home automation software
package). There's a few folks using charmedquark to control their cbus
installs, they might know.
http://www.charmedquark.com/vb_forum/index.php
-----------------------------------------------------
Note: I am a mere end-user with no financial stake in any products that I
may discuss.
My Personal Website w/my Home Automation PC:
http://www.myhomeautomationpc.com, last updated 4/11
My Home Automation Blog: http://homeautomation.wordpress.com/
"Imran" <messenger_boy_2005@hotmail.com> wrote in message
news:12d6nr3nsimlod1@corp.supernews.com...
> Hi all,
>
> I have a question that I hope someone can answer here in Australia we dont
> get the same x10 switches that are availale in the US, I like the Clipsal
> C-Bus switches and these switches appear to be momentary action switches
> anyways.
>
> I was wondering if it is possible to use these switches with an X10 setup
> and as I slowly update my light switchs then I can move to c-bus as a
> phased migration?
>
> Is this possible ?
>
> Thanks
> Imran
>
|
|
|
|
|