|
Home > Archive > Home Automation > September 2006 > x10 couple/repeater
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
x10 couple/repeater
|
|
|
| I don't know if there are any good solutions to how to distribute x10 signal
in a home with two separate 200 amp 220v services from the meter. I have one
leviton hca02-10e. Now that my service has be upgraded to 400 amps the
signal is very weak in some locations leading to errors. I thought I would
have one 400 amp service, with 2 hot leads and a neutral, but instead I got
twi 200 amp services with 4 hot leads! x10 signal have to couple through the
power company's transformer from one 200 amp service to the other one.
Any ideas on the right solution for this?
cel
| |
|
| Check "Uncle Phil" for an article on this, but as I recall; use a amplifier
coupler on each service and connect the two services together with two phase
couplers.
"cel" <cel@nospam.net> wrote in message
news:p65Ng.321$TV3.241@newssvr21.news.prodigy.com...
>I don't know if there are any good solutions to how to distribute x10
>signal
> in a home with two separate 200 amp 220v services from the meter. I have
> one
> leviton hca02-10e. Now that my service has be upgraded to 400 amps the
> signal is very weak in some locations leading to errors. I thought I would
> have one 400 amp service, with 2 hot leads and a neutral, but instead I
> got
> twi 200 amp services with 4 hot leads! x10 signal have to couple through
> the
> power company's transformer from one 200 amp service to the other one.
>
> Any ideas on the right solution for this?
>
> cel
>
>
|
|
|
|
|