|
Home > Archive > Building and Construction > June 2006 > suspended ceiling and ceramic tile floor links please
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
suspended ceiling and ceramic tile floor links please
|
|
|
| can anyone point me to good sites to about these (2) topics. I have to
start the ceiling next in the order of my own personal basement reno. I am
willing to go to heroic measures. Probly need to. I can already think of
some specific questions such as:
Joists and ceiling tiles: CGC pamphlet recommend 3" clearance above all
obstructions such as pipes and ducts (1-1/2" with flexible panels such as
fibreglass): How serious is this. I defineletely don't want to do this.
I've got a 1/2" Cu pipe line (styro tube insulated) that runs 15'. but
theres another 2" above it. If it were up to me I'd set up my grid to put
the panels within 1/2' of these and continue. Whats up?
If there IS such a big difference between std. panels and flexible, there is
only one flex option at my local BORGs (ugly if you ask me), white plastic
paper over yellow fibre avail. Are there more than one option for this type
if I look around elsewhere? The EXTRA 1-1/2" is, IS, a need I have.
Concrete floor and ceramic tiles: on my orig bare concrete basement pour
there are some areas less than perfectly contiguous wrt obtaining an even
thickness for thinset. How do I know if I need a leveller (what the heck is
that), or if I need to mix up some concrete first to level, or how thick I
can fill in these areas with the thinset I will use to stick the tiles down.
Is there a problem, or better choice, to walking in with the interntion of
buying the 79/99 cent/sf tile wrt the above or other consideration?
----== Posted via droptable.com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.droptable.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
| |
| Mike Berger 2006-06-16, 9:42 am |
| I don't know about other considerations but it can be very hard
to get the ceiling tiles in and out of the grid with too little
clearance.
bent wrote:
> Joists and ceiling tiles: CGC pamphlet recommend 3" clearance above all
> obstructions such as pipes and ducts (1-1/2" with flexible panels such as
> fibreglass): How serious is this. I defineletely don't want to do this.
> I've got a 1/2" Cu pipe line (styro tube insulated) that runs 15'. but
> theres another 2" above it. If it were up to me I'd set up my grid to put
> the panels within 1/2' of these and continue. Whats up?
| |
|
|
bent wrote:
> can anyone point me to good sites to about these (2) topics. I have to
Do a google on "John Bridge Forums" for Tile info.
| |
|
| what gives. Are you giving me the business?
| |
|
| So in a room thats 6'6" barely up to the joists I SHOULD go with first
impressions. That is, to lay out so that the panel will just slide in under
the pipe insul, allowing for the T-bar, and little else. The issue is
confused further by their statement of not only 3" clearance, but that there
is a a finite1-1/2" if I did use the flexible fibreglass panels. Maybe the
phamphlet is not giving minimum requirements, but general helpful advice?
What does that flooring stuff cost wrt the cost of the cheap tiles
themselves? Is it gonna lose me 3/4". It has never been anything but dirty
concrete floor in the past. Is 79/99 cent tile more likely to break, or
scuff than tiles that are a little more expensive?
----== Posted via droptable.com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.droptable.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
|
|
|
|
|