Construction forum - FRP panels

You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author

FRP panels

Mr.Grubb

2005-08-16, 7:21 am

If installing on sheetrock- should it be primed first?

Craig K.

2006-05-19, 12:21 am

it does not even have to be taped but make shure that the sheet rock is
clean just recently because of a thin layer of dust that was on the
sheetrock caused it to bubble out in some spots also because frp is to
handle glue your wall not your sheet with the 3/16-1/4 teeth on your trowel.
instalen frp is somthing that takes along time to get good at also make
shure you always use frp glue good luck
"Mr.Grubb" <3f8s@voicenet.com> wrote in message
news:umc3g1pachsffm3f62i6rc316ba190nqoh@4ax.com...
> If installing on sheetrock- should it be primed first?

LinkBot