|
|
| Scott 2006-04-12, 12:21 pm |
| I just bought a Infocus in72, When I try to hook up the component
inputs, the video is choppy and it fades in and out. Any suggestions???
| |
|
| Have you tested your source via component on another TV or monitor?
| |
| Scott 2006-04-12, 12:21 pm |
| I hooked up my laptop through the s video input and it works, but when
I hookup the s-video to the projector, it looks like the old horizontal
adjustment on a tv
| |
|
| Are you setting the S-Video out on the laptop to 16x9 format? Make sure
the infocus is set to maximun resolution. The projector may be trying
to compensate for a non native aspect ratio. Also check here for most
asked questions on your projector.
http://infocus.com/service/IN72/faq...&site_region=1&
| |
|
| The S video on the Laptop to projector works, but S video from DVD
player does not work?? I looked at the website and it does not give any
information. The only information provided on the website that is
similar is the following, except this is happening on my dvd player and
not a computer:
"Setting up image" message periodically appears.
The computer refresh rate is either too high or too low for the
projector to synchronize with. On your PC, go to Start > Control Panel
> Display > Settings > Advanced > Adapter (This varies by operating system and by video card. See your computer/video card documentation for more information). If the adapter allows you to select a profile, choose the native resolution of your projector a
nd set to High Color and 60Hz. You might also be able to change the refresh rate on the Monitor tab. "
| |
|
| Thats an interesting issue. Can I assume the DVD player plays fine on
the regular TV when using the S-Video hook-up? Could the S-Video on the
DVD be defective?
| |
|
| I thought of that but it seems to happen, but not as bad, on the
component hookup of the projector to DVD player. I tried to hookup my
RGB cable to component cable from my HD satellite receiver to the
projector and it detects no signal????
| |
|
| Not sure what is going on. You may want to bite the bullet and get a
local Home Theater guy to do a service call. If you were in Jersey I
could help you out.
| |
|
| I am going to call Technical support later on today. I will post any
news I get, I am sure that this will come up again. Thanks for your
input.
|
|
|
|