|
Home > Archive > Home Theater Forum > October 2007 > Dumb Q -- non-powered speakers connected to TV-out
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
Dumb Q -- non-powered speakers connected to TV-out
|
|
| fishfry 2007-10-16, 8:25 pm |
| I just bought a pair of JBL Control1X speakers. They have traditional
connecting posts (two wires, one to each post).
My tv-out jacks are RCA plugs. I took a pair of RCA-RCA plugs and cut
each one of the pair; separated the signal and ground, and plugged the
signal into the + post, and the ground into the - post of the speakers.
However, no sound comes out.
Somone on a Web forum had told me this setup would work ... but of
course they could be wrong.
Do I need to have an amp between the tv-out and the speakers?
Or should the speakers work the way I did it, and perhaps something else
is wrong?
I formerly had some powered computer speakers plugged in to the tv-out
jacks, and they work fine.
If I need an amp, what's a good one to get? This isn't a mega home
theater setup, I just want to put a pair of speakers on my tv.
Thanks, I hope this question's not too dumb.
| |
| Kalman Rubinson 2007-10-16, 8:25 pm |
| On Tue, 16 Oct 2007 17:47:17 -0700, fishfry
<BLOCKSPAMfishfry@your-mailbox.com> wrote:
>I just bought a pair of JBL Control1X speakers. They have traditional
>connecting posts (two wires, one to each post).
>
>My tv-out jacks are RCA plugs. I took a pair of RCA-RCA plugs and cut
>each one of the pair; separated the signal and ground, and plugged the
>signal into the + post, and the ground into the - post of the speakers.
>
>However, no sound comes out.
>
>Somone on a Web forum had told me this setup would work ... but of
>course they could be wrong.
You can make the connection but the signals are not appropriate.
>Do I need to have an amp between the tv-out and the speakers?
Of course. The RCA outputs are not amplified and the speakers require
amplified signals.
>I formerly had some powered computer speakers plugged in to the tv-out
>jacks, and they work fine.
That's because they have amps in them.
>If I need an amp, what's a good one to get? This isn't a mega home
>theater setup, I just want to put a pair of speakers on my tv.
Google for T-Amps. Used to have them at Target.
Kal
| |
|
| I have a 1987 Mitsubishi TV that still works like new that has a built in
amp to power external speakers. But few tv's have that feature.
"fishfry" <BLOCKSPAMfishfry@your-mailbox.com> wrote in message
news:BLOCKSPAMfishfry-2F61C7.17471616102007@comcast.dca.giganews.com...
>I just bought a pair of JBL Control1X speakers. They have traditional
> connecting posts (two wires, one to each post).
>
> My tv-out jacks are RCA plugs. I took a pair of RCA-RCA plugs and cut
> each one of the pair; separated the signal and ground, and plugged the
> signal into the + post, and the ground into the - post of the speakers.
>
> However, no sound comes out.
>
> Somone on a Web forum had told me this setup would work ... but of
> course they could be wrong.
>
> Do I need to have an amp between the tv-out and the speakers?
>
> Or should the speakers work the way I did it, and perhaps something else
> is wrong?
>
> I formerly had some powered computer speakers plugged in to the tv-out
> jacks, and they work fine.
>
> If I need an amp, what's a good one to get? This isn't a mega home
> theater setup, I just want to put a pair of speakers on my tv.
>
> Thanks, I hope this question's not too dumb.
| |
| Vitamin R 2007-10-17, 9:25 am |
|
"fishfry" <BLOCKSPAMfishfry@your-mailbox.com> wrote in message
news:BLOCKSPAMfishfry-2F61C7.17471616102007@comcast.dca.giganews.com...
>I just bought a pair of JBL Control1X speakers. They have traditional
> connecting posts (two wires, one to each post).
>
> My tv-out jacks are RCA plugs. I took a pair of RCA-RCA plugs and cut
> each one of the pair; separated the signal and ground, and plugged the
> signal into the + post, and the ground into the - post of the speakers.
>
> However, no sound comes out.
Nope, you gotta have an amplifier. Check out Best Buy for a nice home
theater amp, you should be able to get by with one in the $199 range.
| |
| John Carrier 2007-10-17, 9:25 am |
| General Rule of Thumb: RCA plug = line level output. Binding Post =
speaker level output. TV's rarely have speaker level outputs.
Exception to the Rule: Bose is so cheesy, they use RCA plugs for some their
speakers (and about 24 gauge wire).
R / John
"fishfry" <BLOCKSPAMfishfry@your-mailbox.com> wrote in message
news:BLOCKSPAMfishfry-2F61C7.17471616102007@comcast.dca.giganews.com...
>I just bought a pair of JBL Control1X speakers. They have traditional
> connecting posts (two wires, one to each post).
>
> My tv-out jacks are RCA plugs. I took a pair of RCA-RCA plugs and cut
> each one of the pair; separated the signal and ground, and plugged the
> signal into the + post, and the ground into the - post of the speakers.
>
> However, no sound comes out.
>
> Somone on a Web forum had told me this setup would work ... but of
> course they could be wrong.
>
> Do I need to have an amp between the tv-out and the speakers?
>
> Or should the speakers work the way I did it, and perhaps something else
> is wrong?
>
> I formerly had some powered computer speakers plugged in to the tv-out
> jacks, and they work fine.
>
> If I need an amp, what's a good one to get? This isn't a mega home
> theater setup, I just want to put a pair of speakers on my tv.
>
> Thanks, I hope this question's not too dumb.
| |
|
| Yes, you need a power amplifier betweeen the TV audio outs and the speakers.
The audio-out RCA jacks on your TV are pre-amp output jacks. They put out a
tiny signal for an amplifier to boost to drive the speakers.
--
---------------------
DaveW
---------------------
"fishfry" <BLOCKSPAMfishfry@your-mailbox.com> wrote in message
news:BLOCKSPAMfishfry-2F61C7.17471616102007@comcast.dca.giganews.com...
>I just bought a pair of JBL Control1X speakers. They have traditional
> connecting posts (two wires, one to each post).
>
> My tv-out jacks are RCA plugs. I took a pair of RCA-RCA plugs and cut
> each one of the pair; separated the signal and ground, and plugged the
> signal into the + post, and the ground into the - post of the speakers.
>
> However, no sound comes out.
>
> Somone on a Web forum had told me this setup would work ... but of
> course they could be wrong.
>
> Do I need to have an amp between the tv-out and the speakers?
>
> Or should the speakers work the way I did it, and perhaps something else
> is wrong?
>
> I formerly had some powered computer speakers plugged in to the tv-out
> jacks, and they work fine.
>
> If I need an amp, what's a good one to get? This isn't a mega home
> theater setup, I just want to put a pair of speakers on my tv.
>
> Thanks, I hope this question's not too dumb.
|
|
|
|
|