| Author |
I need help identifying an old plumbing tool
|
|
| Trollerama 2005-06-16, 2:27 pm |
|
Hi,
I found this old tool in my basement.
Does anyone know what it is or what it was used for?
Any information would be appreciated. Thanks!
http://neonrabbit.com/plumbingtool.jpg
| |
| Mark Monson 2005-06-16, 2:27 pm |
| It's a faucet seat cutter.
MM
"Trollerama" <eat@Joes.org> wrote in message
news:1t0351dg0r534maullvnq1ltu62stk6q3h@4ax.com...
quote:
>
> Hi,
>
> I found this old tool in my basement.
>
> Does anyone know what it is or what it was used for?
>
> Any information would be appreciated. Thanks!
>
> http://neonrabbit.com/plumbingtool.jpg
| |
| P2P Xtasy 2005-06-16, 2:28 pm |
| Certainly, Neon. It looks like a ratcheting double-ended ballpeen hammer.
Seriously... I don't have a clue. Possibly some sort of a specialty tool
that had only one application such as a machine valve switch handle. If that
is the case, the information may be next to impossible to find.
| |
| Denise McDonald 2005-06-16, 2:28 pm |
| It,s a tap (fawcet) reseating tool.
Tam
| |
| Eric G. 2005-06-16, 2:28 pm |
| "Denise McDonald" <dm011d3760@blueyonder.co.uk> wrote in news:6Mlbe.27455
$TZ6.26294@fe3.news.blueyonder.co.uk:
quote:
> It,s a tap (fawcet) reseating tool.
> Tam
You must be from Flanders's neighborhood. The fat and greedy like to call
them faucets.
| |
| Ned Flanders 2005-06-16, 2:28 pm |
| happy to offend. :-)
so so happy
"Eric G." <NgOrSePeAnM99@Zoptonline.Znet> wrote in message
news:Xns964CCCDE21D5NgOrSePeAnM99Zoptonl@69.28.186.158...
quote:
> "Denise McDonald" <dm011d3760@blueyonder.co.uk> wrote in news:6Mlbe.27455
> $TZ6.26294@fe3.news.blueyonder.co.uk:
>
>
> You must be from Flanders's neighborhood. The fat and greedy like to call
> them faucets.
| |
| Eric G. 2005-06-16, 2:28 pm |
| I guess it does come off as you offending me. Not what I meant, but if it
gets you off, I'll run with it :-)
"Ned Flanders" <mrstinky@verizon.net> wrote in
news:Eevee.17978$yd1.1702@trndny01:
quote:
> happy to offend. :-)
>
> so so happy
>
>
>
>
>
> "Eric G." <NgOrSePeAnM99@Zoptonline.Znet> wrote in message
> news:Xns964CCCDE21D5NgOrSePeAnM99Zoptonl@69.28.186.158...
>
>
>
| |
| Ned Flanders 2005-06-16, 2:28 pm |
| spoken like a dick who would actually rag on spelling mistakes in a post.
"Eric G." <NgOrSePeAnM99@Zoptonline.Znet> wrote in message
news:Xns964DD9F382150NgOrSePeAnM99Zoptonl@69.28.186.158...
quote:
>I guess it does come off as you offending me. Not what I meant, but if it
> gets you off, I'll run with it :-)
>
> "Ned Flanders" <mrstinky@verizon.net> wrote in
> news:Eevee.17978$yd1.1702@trndny01:
>
>
| |
| Red Jacket 2005-06-16, 2:28 pm |
| Looks like a nice one, I'd keep it, considering the junk they
now make..
Lot of people still need them.
"Mark Monson" <m_monson@ztech.com> wrote in message
news:ROg4e.21681$vK6.4562@bignews3.bellsouth.net...
quote:
> It's a faucet seat cutter.
>
> MM
>
>
> "Trollerama" <eat@Joes.org> wrote in message
> news:1t0351dg0r534maullvnq1ltu62stk6q3h@4ax.com...
>
>
|
|
|
|