|
Home > Archive > Plumbing forum > June 2005 > increasing the force of a flush in a toilet
You are viewing an archived Text-only version of the thread.
To view this thread in it's original format and/or if you want to reply to
this thread please [click here]
| Author |
increasing the force of a flush in a toilet
|
|
| Eric and Megan Swope 2005-06-16, 2:28 pm |
| Hi everyone. An American Standard toilet in our powder room does not flush
with great force. Sometimes remnants remain and require an extra flush.
The other 2 toilets in our house are exactly the same, but flush with
greater force. Is there anyway to increase the force with which a toilet
flushes?
Can I buy a different flush valve?
I have tried increasing the water level in the tank, no good. I have
cleaned out the little holes inside the edge of the bowl, no good.
Thanks for any help/suggestions.
| |
|
| "Eric and Megan Swope" <swope1221@verizon.net> wrote in message news:l6nee.8499$Rl6.5627@trndny08...
quote:
> Hi everyone. An American Standard toilet in our powder room does not flush
> with great force. Sometimes remnants remain and require an extra flush.
> The other 2 toilets in our house are exactly the same, but flush with
> greater force. Is there anyway to increase the force with which a toilet
> flushes?
> Can I buy a different flush valve?
>
> I have tried increasing the water level in the tank, no good. I have
> cleaned out the little holes inside the edge of the bowl, no good.
>
> Thanks for any help/suggestions.
Have you checkd to see if the drain is partially clogged?
| |
|
| The problem is directly traceable to attitude of the company
that manufactured the product. Better to buy a new toilet.
Consumer Reports laid this out. Even less expensive European
brands worked better than so many 'top of the line' (most
expensive) American Standard products. Rather than engineer a
quality product, some companies will instead cost control it.
Price had no relationship to which brands performed better.
Manufacturer's reputation for that product line will report
more useful information. Did they engineer it or cost control
it?
A previous poster who removed his American Standard
product. Found no glazing in sections that you cannot see.
That raspy surface only made the flushing even worse.
American Standard - their designs being the problem. But
don't take my word for it. Get Consumer Reports. I believe
it is the May 1998 issue.
Why do some work and others not? Also the size of sewer
pipes will have adverse effects. A larger pipe can cause
additional problems. But it should not. The toilet itself
should have been properly manufactured.
Eric and Megan Swope wrote:
quote:
> Hi everyone. An American Standard toilet in our powder room does
> not flush with great force. Sometimes remnants remain and require
> an extra flush. The other 2 toilets in our house are exactly the
> same, but flush with greater force. Is there anyway to increase
> the force with which a toilet flushes?
> Can I buy a different flush valve?
>
> I have tried increasing the water level in the tank, no good. I
> have cleaned out the little holes inside the edge of the bowl, no
> good.
>
> Thanks for any help/suggestions.
| |
| Speedy Jim 2005-06-16, 2:28 pm |
| Eric and Megan Swope wrote:
quote:
> Hi everyone. An American Standard toilet in our powder room does not flush
> with great force. Sometimes remnants remain and require an extra flush.
> The other 2 toilets in our house are exactly the same, but flush with
> greater force.
<SNIP>
Since the other 2 work, it's fixable.
Look in the bowl, toward the front, for a hole about 3/4" diam.
If this model has one, it is the "siphon jet".
They often get clogged internally with calcium.
Without the jet, you get a "lazy" flush.
When flush begins, you should see a flow of water
out this hole. Compare to the other 2.
If this model does *not* have it, the rim jets
need more thorough cleaning.
Jim
| |
| Joseph Meehan 2005-06-16, 2:28 pm |
| Eric and Megan Swope wrote:
quote:
> Hi everyone. An American Standard toilet in our powder room does not
> flush with great force. Sometimes remnants remain and require an
> extra flush. The other 2 toilets in our house are exactly the same,
> but flush with greater force. Is there anyway to increase the force
> with which a toilet flushes?
> Can I buy a different flush valve?
>
> I have tried increasing the water level in the tank, no good. I have
> cleaned out the little holes inside the edge of the bowl, no good.
>
> Thanks for any help/suggestions.
In addition to Speedy's suggestion, which sounds like it is right since
the other two (I assume same design) are OK, you can try just holding the
handle down a little longer until it has a good flush. Most allow a
standard flush or a full force flush when the handle is held down.
--
Joseph Meehan
Dia duit
| |
| Ned Flanders 2005-06-16, 2:28 pm |
| consumer reports is bullshit.
they use the winning company ad for their layout is a lot of cases.
I have seen them rate shit very high more than once.
"Joseph Meehan" <sligojoe_Spamno@hotmail.com> wrote in message
news:ZQqee.7867$i1.1841@tornado.ohiordc.rr.com...
quote:
> Eric and Megan Swope wrote:
>
> In addition to Speedy's suggestion, which sounds like it is right since
> the other two (I assume same design) are OK, you can try just holding the
> handle down a little longer until it has a good flush. Most allow a
> standard flush or a full force flush when the handle is held down.
>
> --
> Joseph Meehan
>
> Dia duit
>
| |
| Jag Man 2005-06-16, 2:28 pm |
| Eric,
I have no idea on why one of your Am Std toilets is not working as
well
as the others. All I can offer is a suggestion for getting a good
flusher.
An independent study was done of flush performance of low-flus
toilets.
I don't seem to have the Web page bookmarked anymore, but you can
probably
find it with Google. It shows which ones flush and which ones don't.
While
Am Std. had at least one reasonable performer in the test, the best,
low-cost
wane was the Toto Drake. We have two, and they are excellent. As I
recall,
I paid about $185 sans seat.
Ed
"Eric and Megan Swope" <swope1221@verizon.net> wrote in message
news:l6nee.8499$Rl6.5627@trndny08...
quote:
> Hi everyone. An American Standard toilet in our powder room does
not flush
quote:
> with great force. Sometimes remnants remain and require an extra
flush.
quote:
> The other 2 toilets in our house are exactly the same, but flush
with
quote:
> greater force. Is there anyway to increase the force with which a
toilet
quote:
> flushes?
> Can I buy a different flush valve?
>
> I have tried increasing the water level in the tank, no good. I
have
quote:
> cleaned out the little holes inside the edge of the bowl, no good.
>
> Thanks for any help/suggestions.
>
>
| |
| Richard J Kinch 2005-06-16, 2:28 pm |
| Eric and Megan Swope writes:
quote:
> Is there anyway to increase the force with which a toilet flushes?
It is analogous to a tuned LC circuit. You can't change the Q or the time
constant. If there's a restriction somewhere, you can clean that out.
| |
| Mike Grooms 2005-06-16, 2:28 pm |
|
"Eric and Megan Swope"
Try this experiment. As you flush the toilet, dump in a bucket of water.
If it flushes well, then the problem is that that bowl isn't bringing enough
water in fast enough to make it work. If it still doesn't flush well, then
the problem is in the bowl or soil pipe. Report your findings to the
plumbing newsgroup, and we'll provide additional suggestions.
Of course you can also post it on the DIYer board. That's always good
for a laugh or two.
| |
| Mike Grooms 2005-06-16, 2:28 pm |
|
"Eric and Megan Swope"
Try this experiment. Dump a bucket of water as you flush the toilet. If
it still doesn't flush well, then the problem is either in the bowl or the
venting or the soil pipe. If it does flush forcefully, then the problem is
in the tank or rim. Report you findings back to the plumbing newsgroup.
Of course, you can write the DIYers. They're always good for a few
laughs.
|
|
|
|
|