quote:

---

> I'm trying to replace all the pvc plumbing under my double kitchen sink
> (it was actually duct taped together before). I'm adding a direct connect
> tailpiece for my dishwasher run off (I'll won't begin to mention how the
> previous owners had it rigged) but no matter how short I cut the tailpiece
> and the Tee the drain arm still comes up about an inch lower than the top
> of the p trap (which drains strait back to the wall if it matters). I'm
> guessing that the sink is too deep and that the dishwasher was added after
> it was installed? Is there any way to add an extension to lower the p
> trap? I looked at Lowes but didn't see anything that would work.
>