Electrical Engineering - Re: coaxial cable model coupled with high frequency current

You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author

Re: coaxial cable model coupled with high frequency current

Salmon Egg

2007-07-22, 1:25 pm

On 7/22/07 7:51 AM, in article
1185115891.336837.42330@w3g2000hsg.googlegroups.com, "pfaisalbe@gmail.com"
<pfaisalbe@gmail.com> wrote:

> I was trying to develop a coaxial cable model coupled with high
> frequency current transformer in matlab.I am facing lot of problems in
> matlab to start.Does any one can help me , it will be appreciated
>
> Thanks
>
It is difficult to tell exactly what you have in mind. My guess is that you
are trying to make a wide band transformer using coax for high frequency and
ordinary magnetic core transformer techniques to support low frequencies. If
that is the case, there is an extensive literature already available.

Bill
--
Fermez le Bush--less than 18 months to go.

LinkBot