Electrical Engineering - Re: Synopsys TCAD and radiation model in 'sdevice' (supported

You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author

Re: Synopsys TCAD and radiation model in 'sdevice' (supported

sendthis@gmail.com

2008-01-16, 3:25 am

On Jan 8, 7:45 pm, sendt...@gmail.com wrote:
> I'm trying to run the gamma radiation model in TCAD. Does anyone here
> know if it works with anything other than silicon and poly? I ran it
> and I'm only obtaining results for those two materials. It's not
> showing any values for SiO2 or nitride.
>
> Thanks,
> eric

I updated the .par files of the other materials and it still didn't
work. I was able to turn off the radiation model by taking out the
parameters from the Silicon.par file. I also did a -P:All and used the
resulting modified .par file for my simulation and that didn't work
either.

I also varied the dose and dose rates to see if the generation was
just so low TCAD didn't simulate it.

I would appreciate any help you can provide on this. This is for
academic purposes and I'm one of the first people to use this tool at
my university.

LinkBot