Electrical Engineering - Re: Flat color ribbon cable help -

You are viewing an archived Text-only version of the thread. To view this thread in it's original format and/or if you want to reply to this thread please [click here]

Author

Re: Flat color ribbon cable help - - 1 attachment

Palindrome

2008-03-17, 5:25 pm

Gary G wrote:
> I am searching for a ribbon cable supplier.
> An image is attached (I hope) that shows what I am after, except
> in 4 and 5 conductor.
>
> Anyone have a brand and part number to something that would be like this?
>
> 0.100" spacing (2.54mm)
>
What are you after, the cable, the connector or the assembly?

If the cable, it is widely available. eg, ebay:

150133911161

If the connectors, I have seen SIL cable board connectors - but I
normally use SIL socket strips, as shown here:

http://www.aedwis.com/connectors.html#flat

Then use wire-wrap pins with them.

If the assembled cables, then any cable assembler will be able to make
them to order - where they get the cable and the connectors from is
their problem, not the purchaser's!
--
Sue

LinkBot